Loading ...
Loading ...
Loading ...
OIL AND FILTER CHANGE
See the Lubrication Guide section for fluid recommendations, capacities, and
plug torques. Always change the oil and filter at the intervals outlined in the
Periodic Maintenance Chart beginning on page 100. Always change the oil filter
whenever changing oil.
1. Position the vehicle on a level surface.
2. Start the engine. Allow it to warm up at idle for two to three minutes.
3. Stop the engine.
4. Clean the area around the drain plug.
5. Place a drain pan under the crankcase.
6. Remove the drain plug. Allow the oil to drain completely.
CAUTION
Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
7. Install a new sealing washer on the drain plug. The sealing surfaces on drain
plug and crankcase should be clean and free of burrs, nicks or scratches.
8. Reinstall the drain plug. Torque to specification.
TORQUE
Drain Plug
12 ft-lbs (16 N·m)
108
MAINTENANCE
Loading ...
Loading ...
Loading ...