Loading ...
Loading ...
Loading ...
11
How To AVoID jAmmINg THE uNIT:
• Use the unit primarily for hard surface vacuuming.
• Vacuum dried leaves and debris.
• If attempting to vacuum damp debris, alternate vacuuming damp
leaves or debris with vacuuming dry leaves or debris. The dried
debris will help to remove damp debris from inside the unit.
• Empty the bag often and do not overfill the bag to avoid creating
a jam at the bag outlet.
• Hold the bottom of the vacuum tube above any leaf piles to
vacuum from the top and work down and avoid submerging the
vacuum tube into the pile of leaves.
mAINTENANCE
CLEANINg AND SToRAgE
wARNINg: SHoCk HAzARD. Do NoT pou R oR
SpRAy wATER oN THE TooL IN AN ATTEmpT To CLEAN.
CAuTIoN: TURN OFF UNIT AND REMOVE BATTERY FROM TOOL.
Use only mild soap and a damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse any part of the tool into
a liquid. Clean out any clippings, which may have accumulated in
the fan chamber on the Sweeper/Vac using a small wooden stick.
Your Sweeper/Vac should be stored in a dry place.
Do not store the tool on or adjacent to fertilizers or chemicals. Such
storage can cause rapid corrosion of the metal parts.
ACCESSoRIES
wARNINg: DO NOT use this product with any type of
accessory or attachment. Such usage might be hazardous.
For assistance with your product, visit our website www.blackanddecker.
com for the location of the service center nearest you or call the
BLACK+DECKER help line at 1-800-544-6986.
TRouBLESHooTINg
problem
• Unit will not turn on.
• Battery will not charge.
• Unit will not blow air.
• Unit will not vacuum effectively.
• Unit jammed when vacuuming.
Solution
• Check battery installation.
•
Check battery charging requirements.
•
Install fan cover for sweeper
mode or vac tube for vac mode.
• Insert battery into charger until
green LED appears.
• Plug charger into a working
outlet. Refer to “Important
Charging
Notes” for more details.
•
Check current at receptacle by
plugging in a lamp or other appliance.
•
Check to see if receptacle is
connected to a light switch which turns
power off when you turn out the lights.
• Move charger and tool to a
surrounding air temperature of
above 40 degree F(4.5°C) or
below 105 degree F(+40.5°C).
•
Install fan cover for sweeper mode.
Refer to instructions on removing
jams. If the tool still will not blow air,
stop using the tool and take it to a
service center.
•
Empty collection bag. Refer to
instructions on removing jams. If the
tool still will not vacuum, stop using the
tool and take it to a service center.
•
Turn the unit off then remove the
battery. Remove the bag and
vacuum tube. Refer to instructions
on removing jams.
Loading ...
Loading ...
Loading ...