BlueParrott 203890 B250-XTS Bluetooth Headset with Micro USB Charging, Noise Cancelling Headset, Long Battery Life, Easily Connect to Multiple Devices at Once

User Manual - Page 14

For 203890.

PDF File Manual, 18 pages, Download pdf file

Loading ...
Loading ...
Loading ...
VXi B250-XTS User Guide
PAGE 14
ADDITIONAL FUNCTIONS
NOTE: Your cell phone must support the following functions (consult the phone owner’s manual).
Last Number Redial
To re-dial the last number that was dialed from the cell phone, press and hold the Volume Down
button for approximately 1 second. A beep will be heard and the phone will redial the last number.
Reject a Call
To reject an incoming call, press and hold the MFB for 2 seconds. You will hear 2 falling tones and the
incoming call will be transferred to your voicemail (if available).
Voice Dial
To use the Voice Dial feature of the cell phone, quickly press the MFB on the headset. A tone will be heard
and the phone’s voice dialer should open. Clearly speak the command. Repeat quick press of the MFB to
end Voice Dial. The headset must be in Standby Mode to use this feature.
Transfer Audio
To transfer audio from the headset to the cell phone while on a call, press and hold the volume down
button for 1-2 seconds. The audio will transfer to the phone. Repeat to transfer audio back to the headset.
When audio is transferred to the phone, the light on the headset will be off until the audio is transferred
back to the headset.
Turn Headset Indicator Lights On/Off
A quick press of both the Volume Up and Volume Down buttons at the same time will turn the headset
indicator lights off, repeat to turn the indicator lights on. When powering on the headset, the indicator
lights will be in the same state as they were when last powered off.
Automatic Bluetooth Connection
When the headset is powered on, it will automatically attempt to connect to the last device it was paired
with. If the headset was paired with multiple devices and the last connected device is not available
(turned off, out of range,etc.), the headset will attempt to connect to the second-to-last device it was
connected to, etc. It is also possible to reconnect to the device with a quick press of the headset’s MFB.
A tone and the voice prompt,“Your headset is connected, should be heard.
Loading ...
Loading ...
Loading ...