Loading ...
Loading ...
Loading ...
VXi B250-XTS User Guide
PAGE 11
Multipoint Mode allows you to pair and switch between two Bluetooth devices.
Enabling Multipoint Mode
• Turn the headset on. It will display a blinking red light and you will hear a voice prompt, “Power on.”
• While pressing the MFB button, quickly press the Volume Up and Volume Down buttons at the same
time, and then release all buttons.
• You will hear 4 rising tones.
• Once Multipoint Mode is active, shut the headset off.
Pairing the B250-XTS headset to the first Bluetooth Device
• Get the first Bluetooth device ready to pair to the headset.
• Put the headset in Pairing Mode.
• Once the first Bluetooth device is connected, shut off the device and the headset.
Pairing the B250-XTS headset to the second Bluetooth Device
• Repeat steps for pairing the second Bluetooth device
• Get the second Bluetooth device ready to pair to the headset.
• Put the headset in Pairing Mode.
• When the second Bluetooth device is connected, turn it and the headset off.
Using two Bluetooth devices with the B250-XTS headset
• Start with the B250-XTS headset turned off. Turn both Bluetooth devices on, and make sure both
are ready to accept the headset connection.
• Power on headset.
• The B250-XTS headset will connect to both Bluetooth devices. As each Bluetooth device
connects to the headset, you will hear the voice prompt “Your headset is connected.”
MULTIPOINT MODE
Loading ...
Loading ...
Loading ...