1byone Products Inc.
1230 E Belmont Street, Ontario, CA, USA 91761
Customer Service: +1 909-391-3888
www.1byonebros.com
Made in China
Bubble Machine
Instruction Manual
1
Introduction
Thank you for purchasing 1byone Bubble Machine. This instruction
manual contains important information about safety, usage, and
disposal. Use the product as described and keep this manual for future
reference. If you sell this bubble machine or pass it on, also give this
manual to the new owner.
Safety Instructions
• This product is only authorized for domestic use and not for
commercial or industrial purposes. It is only intended for applications
described in these instructions.
• Children or dependents should not use, clean, or perform
maintenance on the bubble machine without adult supervision.
• Only connect the bubble machine to a power outlet type as
indicated in the "Specifications" section of this manual.
• To completely disconnect from power, remove the batteries and
unplug the power adapter.
• Make sure the power cable is visible at all times to avoid stepping on
or tripping over it.
• The machine should not be exposed to dripping or splashing water.
If moisture, water, or any liquid gets inside the housing, immediately
unplug from power and contact a qualified technician to check and
repair it.
• Do not open the housing of the bubble machine. There are no user-
serviceable parts.
• Never leave the machine unattended when it is switched on or
connected to power.
• Never aim the bubble machine at open flames.
• Do not aim the bubble machine directly at people as bubble liquid
may leave permanent markings on clothing.
• Do not transport with liquid. If the machine gets wet, do not use until
it is completely dry.
• Always keep batteries out of the reach of infants and young children
to prevent the batteries from being swallowed. If swallowed, take
immediate action and contact medical authorities for help.
2 3
Product Description
1. DC-IN Jack
2. Liquid Level Display
3. Reservoir
4. Bubble Wand
5. ON/OFF/Speed Switch
6. Handle
7. Battery Compartment
7654321
Included Items
1 x Bubble Machine
1 x Power Adapter
1 x Instruction Manual
Before using the bubble machine for the first time, check the package
contents to ensure all parts are free of visible damage.
Inserting Batteries (Optional)
To insert the batteries, unscrew the screw on the battery compartment
on the top of the machine and remove the compartment cover. Insert
6 C batteries (not included), paying attention to the correct polarity.
Operating Instructions
1. Place the bubble machine on a solid, flat surface and in a well-
ventilated area.
2. Pour bubble liquid into the liquid reservoir. Always ensure the liquid
level immerses at least one wand. Do not fill the reservoir over the
noted maximum level.
3. If batteries have not been installed, plug the bubble machine into a
grounded electrical outlet. If batteries are installed and the machine
is also connected to an outlet, then outlet power will be used.
IMPORTANT: When using the bubble machine powered by batteries,
remove the power adapter from the bubble machine or it won't work.
4. Turn the ON/OFF/Speed Switch clockwise to Speed Level 1.
5. Turn the Switch again for Speed Level 2.
Attention:
It is normal for the bubble machine to produce less bubbles when
using battery power than when plugged in with the power adapter.
Note:
• Keep the air intake ports free from blockage.
• Do not use outdoors in the rain as this may lead to a short circuit.
• Do not leave unused liquid in the reservoir for an extended period.
The liquid may thicken in the reservoir. Remove all liquid before
storing or moving.
• If the bubble machine is to be mounted using a bracket, please note
the machine should only be inclined to a maximum angle of 15
degrees.
• The bubble machine should not be used for more than 8 hours
consecutively and is best operated at 40º-90ºF (4º-32ºC). Performance
of the machine may be reduced in low temperatures.
Cleaning
1. Empty all bubble liquid from the machine.
2. Rinse and drain the reservoir using a little distilled water.
3. Add some warm distilled water to the maximum level.
4. After adding water, turn on the bubble machine and allow it to run in
a well-ventilated area until all wands appear to be free of residue.
5. Drain the remaining water to complete cleaning.
Note:
• It is recommend to clean the bubble machine after every 40 hours of
operation.
• Do not spin the fan using compressed air to avoid damage.
• Always remove the power adapter from the socket before refilling
the liquid or cleaning the bubble machine.
4
Storage
• If you do not intend to use the bubble machine immediately, it is
best to unplug the power cord from the power socket, or remove the
batteries.
• Once the machine has been disconnected from power, it is
recommended to empty the reservoir and store the machine in a
dust-free and dry place.
Specifications
Model: 1-SP03US01,LT-148
AC Adapter Voltage: 100-240V~50-60Hz
Rated Power: 13.5W
Batteries: 6 x C batteries
Output: 9V 1.5A
Size: 170(L)x210(W)x170(H)mm/6.69x8.27x6.69in
Weight: 1.04kg/2.29lbs
Max Tank Capacity: 380ml/13oz
The appliance’s packaging is made from environmentally
friendly material and can be disposed of at your local recycling
plant.
Customer Service/Kundenservice
Service Clients/Atención al cliente/Assistenza Clienti
UNITED STATES
Phone: +1 909-391-3888 (Mon-Fri 9:00am - 5:00pm PST)
Email: ushelp@1byonebros.com
CANADA
Email: cahelp@1byonebros.com
UNITED KINGDOM
Phone: +44 158 241 2681 (Mon-Fri 9:00am - 6:00pm UTC)
Email: [email protected]
GERMANY/FRANCE
ITALY/SPAIN
Email: euhelp@1byonebros.com
BRAND OWNER
1byone Products Inc.
1230 E Belmont Street, Ontario, CA, USA 91761
Customer Service: +1 909-391-3888
www.1byonebros.com
