Netgear ‎GSM7212F-100NES 12-Port Gigabit Ethernet Fully Managed PoE Switch (GSM7212F) - with 4 x PoE+ @ 150W, 12 x 1G SFP (shared), Desktop/Rackmount, and ProSAFE Limited Lifetime Protection, M4100 Series

User Manual - Page 7

For GSM7212F-100NES.

PDF File Manual, 35 pages, Read Online | Download pdf file

GSM7212F-100NES photo
Loading ...
Loading ...
Loading ...
ProSAFE® Intelligent Edge Managed Switches Data Sheet
M4100 series
Page7of35
AutomaticcongurationwithDHCPandBootPAutoInstalleaseslargedeploymentswithascalablecongurationlesmanagementcapability,mappingIPaddresses
and host names and providing individual configuration files to multiple switches as soon as they are initialized on the network
Both the Switch Serial Number and Switch primary MAC address are reported by a simple "show" command in the CLI - facilitating discovery and remote
configuration operations
AutomaticVoiceoverIPprioritizationwithAuto-VoIPsimpliesmostcomplexmulti-vendorIPtelephonesdeploymentseitherbasedonprotocols(SIP,H323and
SCCP) or on OUI bytes (default database and user-based OUIs) in the phone source MAC address; providing the best class of service to VoIP streams (both data and
signaling)overotherordinarytracbyclassifyingtrac,andenablingcorrectegressqueueconguration
AnassociatedVoiceVLANcanbeeasilyconguredwithAuto-VoIPforfurthertracisolation
When deployed IP phones are LLDP-MED compliant, the Voice VLAN will use LLDP-MED to pass on the VLAN ID, 802.1P priority and DSCP values to the IP phones,
accelerating convergent deployments
Versatile connectivity including “PoE Passthrough”
IEEE 802.3af Power over Ethernet (PoE) provides up to 15.4W per port (M4100-50-POE; M4100-26G-POE)
IEEE 802.3at Power over Ethernet Plus (PoE+) provides up to 30W per port (M4100-D12G-POE+; M4100-24G-POE+; M4100-50G-POE+)
Desktop versions can be powered by upstream PoE+ switch using their Port-1 (PD, PoE+ 30W): M4100-D12G and M4100-D12G-POE+
M4100-D12G-POE+canevenredistributePoEpowerfromtheupstreamPoE+switchtoVoIPphonesorotherdevicesinmeetingrooms,retailsalesoorsorother
challenging environments without outlet
Both IEEE 802.3at Layer 2 LLDP method and 802.3at 2-event classification methods are supported for compatibility with all PoE+ PD devices
Automatic MDIX and Auto-negotiation on all ports select the right transmission modes (half or full duplex) as well as data transmission for crossover or straight-
through cables dynamically for the admin
100Mbps backward compatiblity on all SFP ports
IPv6supportwithmulticasting(MLDforIPv6ltering),ACLsandQoS
Tier 1 availability
Rapid Spanning Tree (RSTP) and Multiple Spanning Tree (MSTP) allow for rapid transitionning of the ports to the Forwarding state and the suppression of Topology
Change Notification
IPaddressconictdetectionperformedbytheembeddedDHCPserverpreventsaccidentalIPaddressduplicatesfromperturbingtheoverallnetworkstability
Power redundancy for higher availability when mission critical, including hot-swap PSUs and Fans
Ease of management and control
Dual firmware image and dual configuration file for transparent firmware updates/configuration changes with minimum service interruption
Flexible Port-Channel /LAG (802.3ad) implementation for maximum compatibility, fault tolerance and load sharing with any type of Ethernet channeling from other
vendors switch, server or storage devices conforming to IEEE 802.3ad - including static (selectable hashing algorithms) or dynamic LAGs (highly tunable LACP Link
Aggregation Control Protocol )
Port names feature allows for descriptive names on all interfaces and better clarity in real word admin daily tasks
Loopback interfaces management for routing protocols administration
Private VLANs and local Proxy ARP help reduce broadcast with added security
Management VLAN ID is user selectable for best convenience
Industry-standard VLAN management in the command line interface (CLI) for all common operations such as VLAN creation; VLAN names; VLAN "make static"
for dynamically created VLAN by GRVP registration; VLAN trunking; VLAN participation as well as VLAN ID (PVID) and VLAN tagging for one interface, a group of
interfaces or all interfaces at once
SimpliedVLANcongurationwithindustry-standardAccessPortsfor802.1QunawareendpointsandTrunkPortsforswitch-to-switchlinkswithNativeVLAN
Modern access layer features highlights
Loading ...
Loading ...
Loading ...