Loading ...
Loading ...
Loading ...
8
7. REMOVE BOTTOM PANEL
Using a Phillips screwdriver, remove both bottom panel retaining
screws and set aside.
Disassemble bottom panel from power pack and set aside.
HO0224
RETAINING SCREW LOCATIONS
HO0120
SIDE VIEW
8. REMOVE KNOCK-OUT OPENING (CP55IQ AND CP57IQT SERIES ONLY)
From inside the power pack, remove the wiring box cover by removing 2 retaining screws and
set aside. Punch out the electrical knockout hole on top of the power pack. Install the wire clamp
(included in parts bag).
9. INSTALL THE 8” ADAPTER/DAMPER (CP55IQ SERIES ONLY)
Using 4 no. 8 x 3/8” screws from parts bag, assemble the adapter/damper on the top of the power pack. To ensure proper opening of the
dampers, remove shipping tape if present. Seal all joints with metal foil duct tape to eliminate air leaks.
HR0027
HJ0016
MOUNTING SCREW LOCATIONS
Loading ...
Loading ...
Loading ...