Loading ...
Loading ...
Loading ...
5
●Use the recommended Cleansui cartridge with Cleansui faucet.
●Do not use this device to filter hot water with a temperature of 35
℃or higher through
"filtration" mode.
If you do so, the performance of activated carbon is reduced and the filtered water may temporarily exhibit an
unpleasant odour temporarily.
●If the tap water has not run for a long time or it contains red rust (turbidity), please allow the
water to flow for a while before using the water filter to avoid shortening the cartridge life.
●In areas with high water pressure, it may cause water to splash. Please reduce the water flow
with the stop valve .
●In areas with high water pressure, a noise may occur while purifying water. In addition if the
water volume is too high, the purifying performance may be unsatisfactory. Please adjust the
volume with the faucet lever or stop valve.
●Where the water pressure is extremely low, the water may not come out easily after replacing
cartridge. In that case, run water for about 10 minutes. The water flow will improve.
3. Important Notes for Operation
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...