Loading ...
Loading ...
Loading ...
16
The scan button
By using the channel scan button:
Press the scan button down. The receiver will then scan the pre-
selected channels automatically. During scanning, a brief beep
will be heard every 1½ seconds. When an FM signal is detected
on one of the channels, the scanning stops automatically and two
beep tones are heard. If no FM signal is detected on any of the
pre-selected channels, the scanning will not stop until all chan-
nels have been scanned, i.e. it will return to the starting channel.
A long beep will then be heard.
The hearing care professional can change the channel scan but-
ton function so that it is no longer possible to operate the scan
button. The scan button setting can be noted at the back of these
instructions.
The frequency and volume of the beep tone can also be adjusted
by the hearing care professional.
9 514 0231 001 #03.indd 16 9/21/2015 11:27:56 AM
Loading ...
Loading ...
Loading ...