Loading ...
Loading ...
Loading ...
9
Unpacking
Carton Contents
• Cordless chain saw
• 16 in. (405 mm) Oregon chain
• 16 in. (405 mm) Oregon guide bar
• Cutting bar sheath
• Manual with registration card
NOTE: In order to operate this cordless chain saw, you will
need to additionally purchase either the EcoSharp
®
(model
iBAT40) or EcoSharp
®
PRO (model iBAT40XR) lithium-ion
battery and either the EcoSharp
®
charger (model iCHRG40)
or the EcoSharp
®
SWIFT charger (model iCHRG40QC).
1. Carefully remove the chain saw and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
chain saw. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation risk!
Assembly
m
WARNING! Mount the components very carefully to
ensure the safety and eciency of the machine. If in doubt,
contact an authorized Snow Joe
®
+ Sun Joe
®
dealer or
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! Unpacking and assembly should be
completed on a at and stable surface, with adequate space
for moving the machine and its packaging.
Bar + Chain Mounting
mWARNING! Always wear heavy-duty gloves when
handling the bar and chain. Mount the bar and chain very carefully
so as not to impair the safety and eciency of the machine. If in
doubt, contact an authorized Snow Joe
®
+ Sun Joe
®
dealer or
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! Before mounting the bar and chain, make
sure the battery (sold separately) is not inserted in its housing
and verify that the chain brake is not engaged. This is done
by pulling the front hand guard back towards the body of the
machine.
1. Unscrew the chain tension adjustment knob and remove
the chain/sprocket end cover to expose the sprocket and
access the area where the guide bar needs to be tted
(Fig. 1).
2. Mount the chain in the right direction on the guide bar,
following the symbol printed on the bar
. If the tip of
the bar has a nose sprocket, make sure the drive links are
correctly inserted in the sprocket rims (Fig. 2).
Fig. 1
Chain/sprocket
end cover
Chain tension adjustment knob
Fig. 2
Loading ...
Loading ...
Loading ...