Loading ...
Loading ...
Loading ...
12
DOOR REMOVAL
5. Pull the water tube out of the
conduit from the top of the cabinet.
Press
Press
Press
Press
6. Open both doors to a 90 degree
angle.
NOTE
You will be pulling approximately five
feet of water tube from the back of the
refrigerator. Use care while pulling the
water tube from the unit to be sure that
you do not kink the tube.
90˚
CAUTION
Be sure doors are set aside in a secure
position where they cannot fall and
cause personal injury, or damage to the
doors or handles.
3. Trace lightly around the door’s top
hinges with a pencil. This makes re-
installation easier.
4. Remove bulkhead cover at rear
of unit to access water tubing.
Disconnect the water tube at the
push-lock connection on the rear
of the unit below the bulkhead. The
dispenser line is connected to the
yellow water line coming from the
main water valve.
Loading ...
Loading ...
Loading ...