Loading ...
Loading ...
Loading ...
5
Rear Panel
1. Power Cable Input: Insert the included power cable here to
charge the unit. Note that the Job Rocker Plus can run off the
power cable while it simultaneously charges the battery. The
charge indicator illuminates when the battery is charging.
2. AC Power Outlet: Flip open the rubber plugs and connect
your devices here. The AC outlets work when wall power is
connected.
3. Power Cable Input (DC): Insert the included power cable
here to power Job Rocker Plus from a vehicle’s 12V power
outlet.
4. Fuse Cover: If the unit’s fuse is broken use a screwdriver or
other tool to lift this tab to replace the fuse. Replace it with a
fuse with an appropriate rating. Using a fuse with an incorrect rating can damage the unit and/or fuse.
5. Power ON/OFF Switch: Turns Job Rocker Plus on or off. Please note that while Job Rocker Plus is
connected to a power source, it does not need to be powered on to charge the battery.
6. Battery Level Indicator: While the unit is powered ON and unit is not plugged in, these four lights
indicate the power left in the battery. Battery life varies based on volume and usage.
Connecting with a Bluetooth Device
1. Turn on Job Rocker Plus using the power switch.
2. Navigate to your Bluetooth device’s setup screen, find “Job Rocker Plus” and connect.
3. If your device requires a passcode or PIN, enter “0000”.
Note: The next time you approach Job Rocker Plus with your Bluetooth device, it will automatically re-
connect.
4. If your Bluetooth device is not able to connect to Job Rocker Plus, press the Bluetooth Disconnect
button on Job Rocker Plus to break previous Bluetooth connections and reset the Bluetooth module.
5. Paired LED will light up solid when it is 'paired'.
6. Start playback from your Bluetooth device.
7. To connect to another Bluetooth device, press the Bluetooth Disconnect button. Repeat Step 2.
8. To disconnect a connected Bluetooth device, press the Bluetooth Disconnect button.
Note: If you experience trouble connecting or playing music, update your device's OS.
Using the Radio
1. Turn the radio on using the Radio Selector switch to select either AM or FM.
2. Use the Tuner buttons to search for a radio station. To "Seek" (jump to the next available station), hold
a Tuner button down for a few seconds until it starts to seek a station. The unit will remember the last
station you were on and start at that station when you power off and power on again.
To add a preset:
A. Select either the AM or FM band and then use the Tuner buttons to select the desired radio
station.
B. Press and hold a numeric Radio Preset button for a few seconds to assign the current station to
that preset number. To use an added preset, tap a Radio Preset number once lightly to go to the
stored radio station.
Using the Aux Input
Connect your iPod, iPod touch, iPhone, smartphone, MP3 player, or similar device to the Aux input. Adjust
the output volume on your source device and then adjust the overall volume using the Volume knob on Job
Rocker Plus.
(5V 1.0A)
2
3
6
8
9
1
5
11
4
10
7
12V FUSE12V FUSE
100-120V~ 50/60Hz , MAX 1000W(COMBINED)100-120V~ 50/60Hz , MAX 1000W(COMBINED)
100-120V~ 50/60Hz 1050W100-120V~ 50/60Hz 1050W
T12.5AL 250V~T12.5AL 250V~
12V 12V 10A10A
T10AL 250V~T10AL 250V~
2 2
6
5
3
4
1
Loading ...
Loading ...
Loading ...