Loading ...
Loading ...
Loading ...
38
EN
To cancel the Satellite Recording function while
the Satellite Recording is in progress:
Press [STOP C] on the front panel of the unit, or
press [C (STOP)] on the remote control.
Note
• If the satellite recording starts when the power is on,
the TV will switch over to the channel being
recorded.
• If you want to use the unit during the satellite
recording which starts in standby, press
[Q (STANDBY-ON)] to switch the input on your TV
to the recorder source.
• Recording picture will be distorted if the copy
protection signal is being detected during Satellite
Timer Recording.
• [SAT.REC] does not work under the following
circumstances:
- “HOME” menus are displayed.
- “Timer Programming” menu is displayed.
- Title list or any file list is displayed.
• When a regular Timer Recording and the Satellite
Timer Recording are overlapped, the examples are
given below.
Settings for External Equipment
When you record from external equipment, you can
set the format Auto, PAL or SECAM.
1 In stop mode, press [HOME]. Select
“General Settings” using [U \ D],
then press [OK].
2 Select “Recording” using [U \ D],
then press [OK].
3 Select “Video Standard” using
[U \ D], then press [OK].
4 Select “Auto”, “PAL” or “SECAM”
using [U \ D], then press [OK].
5 Press [HOME] to exit.
Note
• During recording, when a signal other than PAL or
SECAM is detected, an error message appears on
the screen and recording will be paused. Recording
will be resumed when a PAL or SECAM signal is
detected.
Before recording from external equipment, see page
19 for connection instructions.
1 Turn on the TV and the unit, and
select the input of the TV to which
the unit is connected.
If you are recording to the HDD, press [HDD].
If you are recording to a disc, press [DVD] and
insert a recordable disc.
Example 1
Example 2
Example 3
Timer
Recording
Satellite
Recording
Actual
Recording
Timer
Recording
Satellite
Recording
Actual
Recording
Timer
Recording
Satellite
Recording
Actual
Recording
Video Standard
Auto : The Video Standard will be set
automatically according to the
recording material.
PAL : The Video Standard will be set to PAL.
SECAM: The Video Standard will be set to
SECAM.
Recording from External Equipment
General Settings
Auto Chapter
Recording Video Standard
Auto Finalise
Make Rec. Compatible
Auto
PAL
Recording Language
External Input Audio
Video Standard
SECAM
HDDHDD
D
D
VD+R
VD+R
W
W
DVD+RW D
D
VD+R
VD+R
DVD+R
D
D
VD-
VD-
R
R
W
W
DVD-RW
D
D
VD-R
VD-R
DVD-R
E2N41BN_EN.book Page 38 Wednesday, July 2, 2008 4:36 PM
Loading ...
Loading ...
Loading ...