User Manual - Page 7

For RPD-421EW. Also, The document are for others Whynter models: PD-321EW,  RPD-421EW,  RPD-621EW

Loading ...
Loading ...
Loading ...
7
PARTS AND CONTROLS
1. Mode Button
Press to select desired mode: Comfort, Continuous, and Normal
Continuous Mode
Press the Mode Button to activate Continuous dehumidifying operation and the Continuous indicator light will
illuminate when Continuous mode is in operation. In this mode, the unit will continue dehumidifying, regardless
of the rooms humidity. The Humidity Control Buttons are automatically disabled and the compressor will not
stop unless the drain bucket is full, or is removed.
Comfort Mode
Press the Mode Button to activate Comfort Dehumidifying operation. The Comfort Dehumidifying indicator light
will come on when this mode is selected. In this mode, the unit will automatically control the room humidity in a
comfortable range of 45%~55% according to the room temperature. The Humidity Control Buttons are auto-
matically disabled and the compressor will not stop unless the drain bucket is full, removed, or the humidity
level reaches the comfort range percentage.
Normal Mode
Press the Mode Button to activate Normal Dehumidifying operation. The Comfort and Continuous indicator
lights will not illuminate when this mode is selected. In this mode, the dehumidifier can be set to a desired hu-
midity level and fan setting. If the humidity level of the room is higher than the desired humidity setting, the
compressor will turn on. If the humidity level of the room is lower than the desired humidity setting, the com-
pressor will turn off.
2. Filter Button
The check filter indicator is a reminder to clean the air filter for more efficient operation. The filter light will illuminate
after approximately 250 hours of operation. To reset after cleaning the filter, press the Filter button and the light will
turn off.
3. Fan Button
Press to select either Turbo or Normal fan speed. Press the Fan button to engage Turbo Fan mode. The Turbo
light will illuminate. Press the Fan button again to set the unit to Normal Fan mode. The Turbo light will turn off
when Normal Fan mode is activated.
Loading ...
Loading ...
Loading ...