Loading ...
Loading ...
Loading ...
18
Bi-wiring connections
To bi-wire your speakers, separate cables are used to
connect the mid/high-frequency speaker driver (tweeter)
and the low-frequency driver (woofer) on each bi-
wireable speaker to the amplier. Running separate
cables from the amplier can have a profound impact on
relieving the tweeter circuit from the back ush of EMF
(electromotive force) generated by the woofer’s voice
coil, resulting in less interference between HF and LF
ranges and better sound quality.
You need to use speakers that feature two sets of
terminals (total of four) that allow each speaker to be split
into two sections (low-frequency and mid/high-frequency
ranges).
1
Turn o the power to the unit and all
connected components.
2
Remove the shorting bars or bridges on
the speakers.
The LPF (low pass lter) and HPF (high pass
lter) crossovers will be separated.
B
B
High
Low
High
Low
MODE: NORMAL
M-5000
SPEAKERS
OFF
A
B
A
+
B
WIRING
BI
MODE selector
Remove the shorting bar.
PreamplierR channel
R channel L channel
R channel signal L channel signal
R channel
Loading ...
Loading ...
Loading ...