Loading ...
Loading ...
Loading ...
16
Connecting speaker cables
Using standard speaker cables
1
Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable, and twist the exposed wires
together tightly to prevent short circuits.
10 mm (0.4 in)
2
Unscrew the knob on each SPEAKERS
terminal, and then insert the bare wire into
the side hole on the terminal.
Diameter of the speaker cable
wire hole: 6.0 mm (0.24 in)
3
Tighten the knob.
CAUTION
• Do not loosen the knob excessively. Otherwise, the knob
might come o and a child might swallow it accidentally.
• To reduce the risk of electric shock, do not touch the
SPEAKERS terminals while the power to the unit is on.
NOTICE
If the SPEAKERS terminals come into contact with a metallic
rack, a short circuit might occur, resulting in damage to this
unit. When installing the unit in a rack, maintain a sucient
clearance to prevent the SPEAKERS terminals from coming
into contact with the rack.
Loading ...
Loading ...
Loading ...