Loading ...
Loading ...
Loading ...
9
i
nsTallaTion
1.
Open the door and remove the top left
cover.
Installing the Appliance
3.
Adjusttheheightofthe
appliance by turning the
adjustablefeet.
Turn the wrench counterclockwise to raise the appli-
ance and clockwise to lower it. Position the wrench
accordingly.
IMPORTANT
The appliance must be aligned horizontally and
vertically. If the appliance is not level, the main
body of the appliance can become deformed
and the door will not close properly.
3.
2.
Apply the cover strips
to the leading edge of
the appliance housing
on the left and right.
The bottom of the strip
must be in line with
the bottom edge of
the appliance housing
(see detail below).
1.
2.
Installing version
without cover panel
on the appliance top
Adjusttheheightof
the appliance leaving
a gap of approx. 1/8"
between the appliance
top and the underside
of the countertop.
Installing version
with mounted
cover panel on the
appliance top
Adjusttheheightof
the appliance leaving
a gap of approx. 1/8"
between the top of the
cover panel and the
underside of the coun-
tertop.
4.
Fit the base bracket.
4.
Loading ...
Loading ...
Loading ...