Loading ...
Loading ...
Loading ...
10
ninjakitchen.com
11ninjakitchen.com
CARE & MAINTENANCE
CLEANING
• Hand-Washing
Separate all parts and wash in warm,
soapy water with a soft cloth. Thoroughly
rinse and air-dry all parts.
• Dishwasher
All parts, except the motor base, are
dishwasher safe.
• Motor Base
Unplug the motor base before cleaning.
Wipe with a clean, damn cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
• Using the Cleaning Brush
Use the included cleaning brush to clean
hard-to-reach places, as well as remove
excess residue.
Use the end of the cleaning brush to clear
any buildup left over after juicing.
Use the bristle side of the cleaning
brush to clean the filter, if needed.
STORING
For cord storage, wrap cord with hook-and-
loop fastener near the back of the motor base.
DO NOT wrap the cord around the bottom
of the base for storage.
Store the auger and filter assembled in the
feed chute chamber with the pulp spout
installed. Place the juice jug into the pulp
container for easy storage.
OVERLOADING THE UNIT
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the motor. If the unit is overloaded,
the motor will be temporarily disabled.
Should this occur, wait 2 minutes, then press
START/STOP to start the unit.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
So we may better assist you, please register
your product online at registeryourninja.com
and have the product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjaaccessories.com.
IMPORTANT: DO NOT add water to the
feed chute while the unit is operating to
clean the unit.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
unplug unit before troubleshooting�
The REVERSE program is not operating�
• After pressing and holding REVERSE, there will be a beep and a brief pause, then the
auger will rotate in the opposite direction. Release REVERSE to stop. Repeat as needed.
Press START/STOP to resume normal operation.
There is a buildup of pulp in the feed chute chamber�
• There may be a clog in the pulp spout. Press START/STOP to stop the unit, then
remove the pulp spout. Use the end of the cleaning brush to clear the clog, then
reinstall the pulp spout to the feed chute chamber. Resume juicing.
• For best results, allow juicer to process each ingredient before adding more to the feed
chute. Use the tamper to push ingredients down through the feed chute, as needed.
The unit stopped working and is beeping�
• The unit was overloaded with ingredients. Wait 2 minutes then press START/STOP
to start the unit.
Can I juice fruit with seeds and pits in it?
• No. Seeds and pits should be removed from the fruit prior to juicing. For example,
remove the seeds from cherries and the pit from a plum.
Can I juice frozen fruits and vegetables or add ice?
• No, do not use frozen fruit, frozen vegetables, or ice with this unit.
The unit makes a squeaking noise when I juice certain ingredients�
• When the auger is breaking down fibrous ingredients like apples, celery, herbs and leafy
greens, the unit will sometimes make this noise. This is normal and not a cause for concern.
Loading ...
Loading ...
Loading ...