Loading ...
Loading ...
Loading ...
English 17
Installation
STEP 4 Install the ice maker and connect the water line (optional)
If your model supports the optional Auto Ice Maker (part type: RA-T00R63AA/AA)
installation, you can purchase and install the Auto Ice Maker separately.
• To purchase the Auto Ice Maker, visit the Samsung website (www.samsung.com) or
contact your retailer.
• To use the ice maker, you must connect the water line to it. For the ice maker to operate
properly, a water pressure of 20 - 125 psi (0.138 - 0.862 mPa) is required.
• For detailed instructions on the installation of the Auto Ice Maker, refer to the
installation manual enclosed with the Auto Ice Maker kit.
STEP 5 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Plug the power cord into the wall socket to turn the refrigerator on.
2. Open the door, and check if the interior light lights up.
3. Set the temperature to the coldest setting, and wait for about an hour. Then, the freezer
should be slightly chilled, and the motor should be running smoothly.
4. Wait until the refrigerator reaches the set temperature. The refrigerator is now ready
for use.
STEP 6 Final check
When installation is complete, conrm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a at, level surface with a reasonable clearance from the
wall or the cabinet.
• The refrigerator is level and is sitting rmly on the oor.
• The door opens and closes freely, and the interior light turns on automatically when you
open the door.
Untitled-2 17 2021-07-13 6:31:44
Loading ...
Loading ...
Loading ...