Loading ...
Loading ...
Loading ...
11
Press the SLEEP button, the Sleep
Light will be on
In SLEEP mode, the air-
conditioner will automatically adjust the tempera-
ture and fan speed to make the room more comfor-
table during the night. The set temperature will
automatically raise by every 30-60 minutes
and at most change six times until the set
temperature is .
for 10 seconds. Then all of
the display
lights will turn off.
1-2
82.4
4. Sleep:
1. the air conditioner on and off.TurnsPower:
2. Press the COOL button to COOL mode.Cool:
and :3. Use these buttons on the control
panel and remote to increase or decrease the
Set Temperature or Timer. Temperature range:
61 ~88 or 16 ~31 .
1
4
5
6
3
3
7
8
10
9
2
When the unit is in ECO mode, the
light will turn on. In ECO mode, the unit will
turn-off once the room is cooled to the user set
temperature. Fan will also be off at this point.
The unit will turn back on when the room
temperature rises above the user set temperature.
Before the compressor , starts the fan motor will
run for a while, then it will stop for a while-and will
repeat to provide a much more comfortable-feeling
and save energy.
Press the Fan Only button to
FAN ONLY mode.
switch to
9.
10.
Eco:
Fan Only:
Press the FAN SPEED button to
choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL mode and
Hi, Med, Lo in FAN mode.
7. Fan Speed:
By pressing the DISPLAY button, it will switch
off/on all lights on the LED display.
8. Display:
Use these buttons on the control panel
and remote to set the Timer.
Timer Off: The timed stop is programmed by
pressing TIMER button. Set the rest time by
pressing the button or until the rest
time displayed is to your then press
TIMER button again.
Timer On: When the unit is off, press TIMER
button first time, set the temperature with
pressing the button or . Press TIMER
button a second time, set the rest time with
pressing the button or . Press TIMER
button a third time, confirm the setting, then
Note: It can be set to automatically turn off or on
in 0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below
10 hours and 1 hour increment for 10 hours or
above. The SET light will turn on while setting.
To cancel the function, press the TIMER
button again.
liking
a
will
automatically switch on and will show on the display.
set
5. Timer:
In AUTO mode the unit automatically
chooses the fan speed and the mode of operation
(COOL,DRY or FAN).In this mode the fan speed
and the temperature are set automatically according
to the room temperature (tested by the temperature
sensor which is incorporated in the indoor unit.).
6. Auto Mode:
Loading ...
Loading ...
Loading ...