Loading ...
Loading ...
Loading ...
4
INSTALLATION INSTRUCTIONS
UNPACK THE REFRIGERATOR
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
REMOVE THE PACKAGING
•
Remove tape and glue residue from surfaces before turning on
the refrigerator. Rub a small amount of liquid dish soap over the
adhesive with your ngers. Wipe with warm water and dry.
•
Do not use sharp instruments, rubbing alcohol, ammable
uids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see “Refrigerator Safety.”
•
Dispose of/recycle all packaging materials.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to cover the oor with
cardboard or hardboard to avoid oor damage. Always pull
the refrigerator straight out when moving it. Do not wiggle or
“walk” the refrigerator when trying to move it, as oor damage
could occur.
CLEAN BEFORE USING
After you remove all of the packaging materials, clean the inside
of the refrigerator before using it. See the cleaning instructions in
“Refrigerator Care.”
Important information to know about glass shelves and
covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small, pebble-
size pieces. This is normal. Glass shelves and covers are heavy.
Use both hands when removing them to avoid dropping.
DOOR REMOVAL (OPTIONAL)
Measure the refrigerator to make sure it will t through the
doorway. If the refrigerator cannot pass through the doorway you
will need to remove the doors and drawer.
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Reconnect ground wire before operating.
Failure to do so could result in death or electric shock.
REMOVE LEFT-HAND DOOR
1. Unplug refrigerator, or disconnect power.
2. Keep the refrigerator door closed until you are ready to lift it free
from the cabinet.
NOTE: Provide additional support for the door while the hinges
are being removed. Do not depend on the door gasket magnets
to hold the door in place while you are working.
3. Using a screwdriver, open and remove the top hinge cover.
4. Using a screwdriver, unscrew the ground wire and disconnect
the harness wires and the water tube.
Loading ...
Loading ...
Loading ...