Loading ...
Loading ...
Loading ...
10
7. Screw the end of the high-pressure hose clockwise into
the trigger gun and tighten securely (Fig. 9). To release the
high-pressure hose from the trigger gun, unscrew the end
of the hose counterclockwise.
8. Connect the other end of the high-pressure hose to
the water outlet on the pressure washer (Fig. 10).
First, push the high-pressure hose end completely onto
the high-pressure water outlet, then screw it on clockwise.
Tighten securely.
mWARNING! Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
9. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Fig. 11). The garden hose must have an internal diameter
of at least 13 mm (1/2 in.) and must be reinforced.
The water supply must be at least equal to the washer
delivery capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
10. Attach garden hose to water supply (Fig. 12).
mWARNING! The intake water temperature must
not exceed 104ºF/40ºC. The water supply must not
exceed 0.7 MPa.
mCAUTION! The washer must only be used with clean
water; use of unltered water containing corrosive chemicals
will damage the washer.
Trigger gun
Fig. 9
High-pressure hose
Fig. 10
(BACK)
High-pressure
water outlet
High-pressure
hose
Fig. 11
(FRONT)
Water inlet
(female
coupler)
Garden hose
Garden hose
(male end)
This end to
water inlet
Fig. 12
Connect to water supply
Garden hose
Loading ...
Loading ...
Loading ...