Loading ...
Loading ...
Loading ...
2. A screen is displayed for a period of time
that indicates the status of the driving
aid functions (if so equipped).
– AEB with Pedestrian Detection, LDW,
and BSW are enabled when the speci-
fied driving aid is shaded.
– I-LI is enabled when the driving aid is
solid.
– Use the
O
1
or
O
2
button to
navigate the settings screen. For ad-
ditional information, see “How to use
the vehicle information display”
(P. 2-19) or (P. 2-34)
3. Keep the foot brake pedal depressed
and move the shift lever to a driving
position.
4. Release the foot brake, then gradually
start the vehicle in motion.
5. Stop the vehicle completely before mov-
ing the shift lever to the P (Park) position.
WARNING
• Do not depress the accelerator pedal
while shifting from P (Park) or N (Neu-
tral) to R (Reverse), D (Drive), L (Low) or
manual shift mode (if so equipped).
Always depress the brake pedal until
shifting is completed. Failure to do so
could cause you to lose control and
have an accident.
• Cold engine idle speed is high, so use
caution when shifting into a for ward
or reverse gear before the engine has
warmed up.
• Do not downshift abruptly on slip-
pery roads. This may cause a loss of
control.
• Never shift to either the P (Park) or R
(Reverse) position while the vehicle is
moving forward and P (Park) or D
(Drive) position while the vehicle is
reversing. This could cause an acci-
dent or damage the transmission.
CAUTION
• Except in an emergency, do not shift
to the N (Neutral) position while driv-
ing. Coasting with the transmission
in the N (Neutral) position may cause
serious damage to the transmission.
• To avoid possible damage to your ve-
hicle, when stopping the vehicle on
an uphill grade, do not hold the ve-
hicle by depressing the accelerator
pedal. The foot brake should be used
for this purpose.
Starting and driving 5-19
Loading ...
Loading ...
Loading ...