Loading ...
Loading ...
Loading ...
– “Distance & Time” - resets the distance
and time of the selected drive com-
puter screen.
– “Fuel Economy” - resets the fuel
economy of the selected drive com-
puter screen.
• “All” — resets all linked drive computer val-
ues. This includes distance & time, aver-
age fuel economy and average speed in-
formation.
OIL CONTROL SYSTEM (if so
equipped)
The oil control system can be accessed in
the Maintenance portion of the vehicle in-
formation display settings.
Engine oil information informs the distance
to oil change. Never exceed one year or
7,500 miles (12,000 km) between oil change
intervals for the 2.0L 4 cylinder (KR20DDET
engine model) or 10,000 miles (16,000 km)
between oil change intervals for the 2.5L
4 cylinder (PR25DD engine model).
Display when
ignition is ON
Display timing Action Required
Engine Oil Ser-
vice due in xxx
kilometers
Remaining oil
life is less than
940 miles (1500
km).
Plan to have
your vehicle
serviced.
Service due
now
Remaining oil
life is 0 miles
(0 km).
Have your ve-
hicle serviced
within two
weeks or less
than 500 miles
(800 km).
The oil change interval cannot be adjusted
manually.
The distance to oil change interval is calcu-
lated depending on the driving conditions
and set automatically by the oil control sys-
tem. A reminder will be displayed when ap-
proaching the end of the service interval.
When the Factory Reset option is selected
in the vehicle information display, the oil
control system will also be reset to initial
value. Please change the engine oil when
Factory Reset is selected.
CAUTION
If the oil replacement indicator is dis-
played, change the engine oil within
two weeks or less than 500 miles (800
km).
Operating the vehicle with deteriorated
oil can damage the engine.
To reset oil control system:
1. Place the ignition switch in the ON
position.
2. Press the
and buttons located
on the steering wheel until “Settings” dis-
plays in the vehicle information display.
Use
to select “Maintenance”.
Then, press the OK button.
3. Select “Oil Control System” and press the
OK button.
4. Press the OK button according to the
reset instructions displayed at the bot-
tom of the “Oil Control System” mainte-
nance screen.
5. For additional information, refer to the
separate maintenance booklet.
2-20 Instruments and controls
Loading ...
Loading ...
Loading ...