Loading ...
Loading ...
Loading ...
4
INSTALLATION OVERVIEW
Site Selection - Your new electric fireplace may be wall mounted, installed into existing
framing, or built into a wall. Review and consider all of the following conditions for
installation:
- Electric fireplace dimensions
- Unit requires a minimum of two wall studs in order to ensure a secure installation.
There are two possible installation methods: built-in and wall-mounted.
Note: A 15-Amp, 12-Volt circuit is required. A dedicated circuit is preferred, but not
essential.
UNPACKIING AND TESTING FIREPLACE
Carefully remove the unit from the box. Prior to installing the unit, test to make sure the
unit operates properly. To do this, plug the unit’s power supply cord into a 120-volt
grounded outlet.
BEFORE YOU INSTALL
1. Select a location that is not exposed to moisture or dust, and is away from high
traffic locations, and away from objects that may catch fire or potentially block
electric fireplace’s openings such as drapes, pillow, furniture, textiles, etc.
2. For the best effect, install the fireplace out of direct sunlight and away from direct
overhead lighting.
3. As much as possible, select a location near an existing electrical outlet. Do not
use an extension cord with this appliance.
4. Remove electric fireplace, foam glass panel, pebbles, and all hardware from box
and remove all packaging-related materials prior to installation. NOTE: There is
foam inside the unit that must be removed before installation occurs.
Loading ...
Loading ...
Loading ...