Loading ...
Loading ...
Loading ...
28
Variety Smart Features
English
Smart FeaturesSmart Features
Freeze Wash function
Use the Freeze Wash function to wash away microorganisms or dust
on the surface of the indoor heat exchanger by freezing and thawing
operation.
In operation stop condition,
▶ ▶ Select Wash. ▶
NOTE
• The Freeze Wash function runs from 30 to 80 minutes (running
the outdoor unit) depending on either temperature or humidity
in the room, through the following cycle: freezing → defrosting →
drying of the indoor unit heat exchanger.
• The indoor unit display shows the cleaning progress (1-99 %).
• To use another function while in Wash operation, press the
(Power) button on the remote control to stop operation.
• When the room temperature is low or its humidity is high, the
Freeze Wash function may not work.
• Before finishing the Freeze Wash function, the airflow blade is
closed and then the drying operation starts.
• During the Freeze Wash cycle, when you hear a creaking noise
from the indoor unit: DON’T worry because it is normal and it can
happen! it will disappear at the end of the cycle.
• The area around the indoor unit may appear blurred or
condensation may form while the Freeze Wash function is in
operation.
• You may see frost or water on the surface of the outdoor unit's
valve while the Freeze Wash function is in operation.
• It is recommended to use the Wash function once every 2 weeks.
Otherwise, dust or dirt that is difficult to be removed may
accumulate in the heat exchanger.
Loading ...
Loading ...
Loading ...