Sony ILCE-6300L α6300 Emount Camera With Apsc Sensor

User Manual - Page 283

For ILCE-6300L.

PDF File Manual, 286 pages, Read Online | Download pdf file

ILCE-6300L photo
Loading ...
Loading ...
Loading ...
An incompatible memory card is inserted.
The memory card is damaged.
The terminal section of the memory card is dirty.
Memory card locked.
You are using a memory card with a write-protect switch or a delete-protect switch with
the switch set to the LOCK position. Set the switch to the record position.
Cannot open the shutter since the memory card is not inserted.
No memory card has been inserted.
To release the shutter without inserting a memory card into the camera, set [Release w/o
Card] to [Enable]. In this case, images will not be saved.
This memory card may not be capable of recording and playing normally.
An incompatible memory card is inserted.
Processing...
When performing noise reduction, the reduction process takes place. You cannot do any
further shooting during this reduction process.
Unable to display.
Images recorded with other products or images modified with a computer may not be
displayed.
Processing on the computer such as deletion of the image files may cause
inconsistencies in the image database files. Repair the image database files.
Cannot recognize lens. Attach it properly.
The lens is not attached properly, or the lens is not attached. If the message appears
when a lens is attached, reattach the lens. If the message appears frequently, check
whether the contacts of the lens and product are clean or not.
When attaching the product to an astronomical telescope or something similar, set
[Release w/o Lens] to [Enable].
The SteadyShot function does not work. You can continue to shoot but the SteadyShot
function will not work. Turn the product off and on again. If this icon does not disappear,
consult your Sony dealer or local authorized Sony service facility.
The retractable lens with power zoom is retracted. Turn off the product and eject the
battery pack, then reinsert the battery pack.
Unable to print.
You tried to mark RAW images with a DPOF mark.
Internal temp. high. Allow it to cool.
The product has become hot because you have been shooting continuously. Turn the
Loading ...
Loading ...
Loading ...