Loading ...
Loading ...
Loading ...
– 20 –
8. Open the door and take the food out.
The oven lamp will turn on. The digital display will show the originally selected
time and heating stage number.
9. Close the door.
The oven lamp will turn off and 1 minute later the Digital Display Window will go
blank.
SPECIAL NOTE: For both single and 4 stage heating.
1. While heating, one touch on Stop/Reset Pad stops the oven. You can restart it by
touching Start Pad or a second touch on Stop/Reset Pad will cancel the selected
program.
2. While not in a heating cycle, one touch on Stop/Reset Pad cancels the selected
program.
REPEAT FEATURE
1. You can repeat exactly the same manually selected heating time by touching
only Start Pad, if you use the oven again within 1 minute.
2. After 1 minute of non-use with the door closed, the repeat feature will be
cancelled.
B. Manual 2 to 5 Stage Heating
1. Follow Steps 1–5 on page 19.
2. Select the desired Power Level for the second stage heating by touching Power
Level Selector Pad the appropriate number of times.
The Power Level will be displayed in the Digital Display Window and the second
stage indicator “2” will start to blink.
[Example]: Touch Power Level Selector Pad 8 times for LOW power.
3. Set the desired heating time for the second stage by touching the appropriate
Number Pads.
Note: The maximum set time for “DEFROST” and “P0” is 30 minutes, and
15 minutes for all others.
However, the TOTAL TIME can be set up to 25 minutes for continuous
heating (1 to 5 stage heating) that excludes “DEFROST” and “P0”.
[Example]: Touch Number Pads “1”, “0” and “0” for 1 minute.
4. Touch Start Pad.
A. The total time for both stages will be displayed.
B. The oven lamp will turn on.
C. During operation, the indicator appears in order from the left.
D. The heating time for the first stage will count down.
5. After the first stage heating time expires, a single beep tone will sound, the
second stage heating indicator “2” will start to blink, and the heating time will
continue to count down.
6. When all time expires, the end of cycle beep tone will sound. All heating will stop.
The oven lamp will turn off. The time display will blink “0000” until the door is
opened. 1 minute later cooling fan will stop.
(Continued on next page.)
How to Operate NE-1853
Loading ...
Loading ...
Loading ...