Loading ...
Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Assemble your machine with the filters that are supplied.
Dyson Purifier Hot+Cool
Supplied with a HEPA+Carbon filter.
Push your HEPA+Carbon filter into the outer cover and position onto the
base. Push firmly until both outer covers click securely into place.
Clik
Clik
Dyson Purifier Hot+Cool
Supplied with separate HEPA and carbon filters.
Push the carbon filters into place on the machine.
Push the HEPA filter into the outer cover. Put the outer covers into position
on the base and push firmly until they both click securely into place.
Clik
Clik
Dyson Purifier Hot+Cool Formaldehyde
Your machine comes with a permanent catalytic filter and a HEPA+Carbon
filter.
Push the catalytic filter into position on the machine.
Push the HEPA+Carbon filter into the outer cover and position on the base.
Push firmly until both outer covers click into place.
Clik
Clik
Getting started
Place the remote control on top
of the machine with the buttons
facing down.
Plug in and switch on.
Standby on/off Information menu
Airflow speed
Auto mode
Oscillation on/off Airflow direction
Night mode
Remote control
Standby on/off
Sleep timer
Cooling mode
Heating control
Clik
Clik
The air purifier fan heater
with the filter covers
open showing a HEPA
filter located in the filter
covers and a carbon filter.
Arrows demonstrate that
the carbon filter is fitted
directly to the base of the
machine and the filter
covers will need to be
assembled onto the base
of the machine.
The air purifier fan heater
with the filter covers open
showing a HEPA plus
carbon filter located in the
filter covers and a catalytic
filter. Arrows demonstrate
that the catalytic filter is
fitted directly to the base
of the machine and the
filter covers will need to be
assembled onto the base
of the machine.
An image of the air purifier fan
heater with the remote placed on
the top of the loop amplifier and
the location of the standby on/off
button on the top of the base of
the machine.
The layout of the remote control with the standby button on the top left, the
airflow speed toggle button in the middle left with the Auto mode button
below, then the Oscillation button and then at the bottom is the Sleep timer
button. On the top right-hand side is the Information menu button, then go-
ing downwards is the Heating control button, Cooling mode button, Airflow
direction and then Night mode button at the bottom.
The air purifier fan heater
with the filter covers open
showing a HEPA plus
carbon filter located in
the filter covers. Arrows
demonstrate that the filter
covers will need to be
assembled onto the base
of the machine.
Loading ...
Loading ...
Loading ...