Loading ...
Loading ...
Loading ...
9
EN
2. DESCRIPTION
a Machine body
b Lid
c Water tank
d Water level indicator
e Carafe lid
f Carafe handle
g Carafe
h Warming plate
i Filter holder
j Permanent filter (avoids paper filters)
k BREW button
l AUTO button
m HR button
n MIN button
o BOLD button
p 1 - 4 cups button
q CLEAN button
r ON OFF button
s Filter cartridge holder*
t Filter cartridge*
u Cartridge replacement indicator*
v Spoon
w CLOCK button
3. SETTING THE CLOCK
Place the coffee maker on a hard flat surface.
Connect the power cord to a 120V wall socket.
1 - When you plug in the coffee maker for the first time, “1:00 pm” will start flashing on the display. Fig. 1.
Set the time by pressing the HR button (m) to set the hour and the MIN button (n) to set the minutes.
The time will appear on the display. It will be automatically set after 5 seconds or by pressing the BREW
button (k).
2 - You can also change or reset the time whenever you wish by pressing the CLOCK button (w) then
adjusting the time by pressing HR (m) for the hours and MIN (n) for the minutes. The time will appear
on the display. Figs. 2 and 3. It will be automatically set after 5 seconds or by pressing the CLOCK
button.
NB: Your clock is now set and will continue to show the time, even when your machine is in standby mode.
If the machine is unplugged or there is a power failure, the clock will default to 1:00 pm. Repeat the steps
above to reset the clock.
4. BEFORE FIRST USE
Remove stickers from your coffee maker.
Before using your coffee maker for the first time, run a cycle without coffee to rinse the circuit. Fill the water
tank to the maximum level and start a cycle by pressing the brew button (k).
IMPORTANT : Your machine has been designed to work with cold or water at room temperature only.
5. MAKING COFFEE
Open the coffee maker lid (b). Fig. 4.
Fill the carafe (g) with cold or water at room temperature, then pour it into the water tank (c) Fig. 5.
The number of cups is shown by the water level indicator. Do not exceed 12 cups. Fig. 6.
Place the carafe (g) with its lids (e) onto the warming plate (h) making sure that it is properly positioned
so as to activate the coffee pouring mechanism. Fig. 9.
Make sure that the filter holder (i) is inserted. Fig. 7. Insert the permanent filter (j) Fig. 8a or a paper filter
into the filter holder (i). If using a paper filter, make sure it is fully opened and properly positioned in the
filter holder. Fig. 8b.
Add 1 KRUPS spoon (v) of ground coffee per cup. Do not exceed 12 spoons (2 ounces). Fig. 10.
If you accidentally pour ground coffee into the water tank, do not start the cycle. Clean the tank, otherwise
the coffee may block the water circuit.
*depending on the model
Loading ...
Loading ...
Loading ...