Loading ...
Loading ...
Loading ...
MAIN POWER
CONTROL FRAME
LOCK FEATURE
STANDBY LIGHT
INDICATES LOCKED UNIT
POWER BUTTON
MAIN POWER AND SAFETY LOCK
HOT SURFACE INDICATOR
BURNER CONTROL
FRAME
HEATING LEVEL
CONTROL SWEEP
LED LIGHT
ARRAY
+ BUTTON
- BUTTON
BURNER CONTROL FRAME
HEATING LEVEL COOKING MODE
16 LED LIGHT ARRAY
TEMPERATURE COOKING
MODE BUTTON
COOKING TEMPERATURE
READOUT
+ BUTTON
- BUTTON
BURNER CONTROL
FRAME
TEMPERATURE COOKING MODE
TEMPERATURE UNITS AND TIMERS
TEMPERATURE UNIT
SELECTOR BUTTON
MAIN POWER
CONTROL FRAME
KITCHEN AND
COOKING TIMER
6
5
4
2
Cooking Timer
Each burner has its own cooking timer that
can be activated to shut the burner off at the
end of the set time.
At any time during cooking for each burner, set
the desired time duration by rst touching the
clock grahic then touching the + and – buttons,
holding the button to increase or decrease
the setting. A beep will sound at the start of
the setting and the set time will display in the
control fame. The time increments will run from
1-10 minutes in 1 minute increments, and then
change to 5 minute increments. The time
reading will speed up as the touch is held.
Touch the timer button to start. If no time is
set, the timer will deactivate after 20 seconds
and normal cooking will resume.
As the set time elapses, the display will show
the time remaining in minutes until it reaches
one minute, after which the display changes to
seconds remaining to zero. The burner will
automatically shut-off and stop cooking at the
end of the set time. The display will ash and
a single beep alarm will sound every ve
seconds until the power button is touched,
within 30 seconds. After 30 seconds of no
activity after the time has elapsed, the timer
will shut off and the hot indicator light will
remain illuminated until the unit has cooled.
Operation
Timer Options
Kitchen Timer
The kitchen timer is a general timer that has
many uses around the kitchen, independent of
cooking activity on the induction cooktop.
Activate the main power and touch the timer
clock graphic within either burner control
frame. Set the desired time duration by
touching the + and – buttons, holding the
button to increase or decrease the setting.
A beep will sound at the start of the setting and
the set time will display in the control fame.
The time increments will run from 1-10
minutes in 1 minute increments, and then
change to 5 minute increments. The time
reading will speed up as the touch is held.
Touch the timer button again to start. If no time
is set, the timer will deactivate after 20
seconds.
As the set time elapses, the display will show
the time remaining in minutes until it reaches
one minute, after which the display changes
to seconds remaining to zero. The display
will ash and a double beep alarm will sound
every ten seconds until the power button is
touched or after 3 minutes, the ashing display
and alarm will deactivate.
13
Loading ...
Loading ...
Loading ...