Zephyr AK7742AS Titan Pro 42" Stainless Steel Island Hood

User Manual - Page 17

For AK7742AS.

PDF File Manual, 46 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Maintenance – Cleaning, Filter Removal & Lights
15
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Clean periodically with warm soapy water and clean cotton cloth or micro ber cloth. Always rub in the direction of the stainless
steel grain. To remove heavier grease build up use a liquid degreaser detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and bu󰀨 out the stainless luster and grain. Always
scrub lightly, with clean cotton cloth or micro ber cloth and bu󰀨 in the direction of the stainless steel grain.
Stainless Steel Ba󰀪e Filters
The stainless steel bafe lters are intended to trap residue and grease from cooking. Although the lters should never need
replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry lters and re-install before using hood.
Removing Ba󰀪e Filters
1. Push lter toward back of range hood using handles.
2. Pivot front of lter downward.
3. Remove lter by pulling away from hood.
4. Repeat steps for the lters facing the other way.
Cleaning the Grease Tray
The grease tray is intended to catch residue and grease that may drip from the ba󰀪e lters. The grease tray should be cleaned
when ba󰀪e lters are cleaned. Clean the grease tray by soaking in hot soapy water and gently scrubing any residue o󰀨 with a
soft terry cloth. Dry grease tray and re-install before using hood.
REPLACING LIGHT BULBS
Make sure all power is turned o󰀨.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and falls out. If bulbs are
di󰀩cult to turn due to prolonged use, rmly attach a glass suction cup approximately the diameter of the bulb or use a rubber/
latex glove and turn counter clockwise. FIG. I.
Directional Lighting
The light bulbs can be tilted forwards and backwards to better direct light over your cooking surface. FIG. J.
Replacement bulbs are available to purchase directly from Zephyr. Purchase online at http://store.zephyronline.com or call us at
1.888.880.8368
1
2
3
1
2
3
FIG. I FIG. J
Loading ...
Loading ...
Loading ...