Loading ...
Loading ...
Loading ...
9
7. Specifications and Performance
Product Name PITCHER SERIES
Model number ACP405 ACP407
Material
Body: SAN (AS)
Cartridge: ABS
Lid: PP, ABS
Funnel: MBS
Filter components Hollow fiber membrane, activated carbon, ceramics
ACP405, ACP407 Performance Data Sheet
Cleansui Reduction Data NSF/ANSI Standard Requirements
Substance Overall persentage reduction
Influent challenge
concentration mg/L
Reduction requirement /
Maximum permissible product
water concentration (mg/L)
NSF/ANSI Standard 42 - Aesthetic Effects
Chlorine 97.5 0 % 2.0 mg/L +/-10%
≧
50%
NSF/ANSI Standard 53 - Health Effects
Cyst > 99.99% minimum 50,000/L 99.95%
Turbidity 99.1% 11 ± 1 NTU 0.5 NTU
Maintenance according to the manufacturer’s instructions is critical for proper filter
performance. Filter life should not exceed 52.83 gallons (200 liters). If filtering time is notably
increased, replace the filter earlier.
This system has been tested according to NSF/ANSI 42 and 53 standards by NSF International
for reduction of the substances listed above. The concentration of the indicated substances in
water entering the system was reduces to a concentration less than or equal to the permissible
limit for water leaving the system, as specified in NSF/ANSI 42 and 53.
The system conforms to NSF/ANSI 42 and 53 for specific performance claims as verified and
substantiated by test data. While testing was performed under standard laboratory conditions,
actual performance may vary.
The use of this system need comply with applicable state and local laws.
Working pressure (min/max): N/A
Capacity: 52.83 gallons (200 liters)
Service flow rate: N/A
Filtered water temperature (min/max): 33°F / 95°F (1°C / 35°C)
Electrical requirements: none
Replacement cartridge: ACPC5W
Loading ...
Loading ...
Loading ...