Loading ...
Loading ...
Loading ...
66
PREPARING YOUR H-PURIFIER
GB
Fig.1
1. Filter Assembly [Fig. 1]
Before using your H-Purier product you will need to remove the lter from it’s protective packaging:
•
Remove the Air Inlet Cover from your product, grip the two Air inlet cover handles and pull from the product.
[Fig. 1a]
• Remove the plug from the transport location and release the cord from the Storage Hook. [Fig. 1b,c]
• Unlock the Filter release switch. [Fig. 1d]
• Remove the lter from your product and remove the outer packaging. [Fig. 1e,f]
• Ret the lter into your product. [Fig. 1g]
• Lock the lter release switch. [Fig. 1h]
• Ret the Air Inlet Cover to your product. [Fig. 1i]
Multi Sensor Monitoring System
Thanks to the Multi Sensor Monitoring System your product will continuously monitor the indoor air condition in terms of PM10, PM2.5, Volatile
Organic Compounds (GAS), and Carbon Monoxide concentration (CO).
Each time you switch your product on, the Multi Sensor Monitoring system will start analyzing the indoor air and the Air Quality LED Ring will
illuminate with different colors representing real time air quality conditions.
Carbon Monoxide Concentration Monitoring and Alarm
The H-Purier will constantly monitor the indoor air for Carbon Monoxide (CO). The product is equipped with an
alert system
When the Carbon Monoxide alarm is activated, the AIR Quality LED Ring, Infomation & CO Alert button will ash red simultaniously and an
audible alarm will sound. The alarm will remain in operation until the Carbon Monoxide (CO) concentration has reduced to below 50 ppm unless
silenced manually by pressing the CO Alert Button for 3 seconds.
This CO Alert LED shows the working condition of the CO sensor. It appears in green color when the CO sensor is in normal condition, in yellow
color when the sensor is malfunctioning or exceeds its working life.
Air Quality
LED Ring Colour
Indoor
Air Quality
GREEN EXCELLENT
YELLOW SATISFACTORY
ORANGE POOR
RED VERY POOR
You can test if the alarm is working properly by pressing the CO Alert Button for 3 seconds, and a loud buzzer sound will last for 5 seconds if the
alarm works properly.
Loading ...
Loading ...
Loading ...