Loading ...
Loading ...
Loading ...
34
EN
Control functions
Before lighting the barbecue:
• Check that all the gas hoses and fittings are tight.
• Open the thin or high cover.
Gas leakage detection test
Never use a match or flame, use soapy water solution and spray or brush the solution onto all
connections. Carefully check for bubbles which indicate a gas leak. If leaks are detected, turn
the gas off and retighten connection(s), then repeat test. The fittings must be thoroughly rinsed
with clean water after testing.
NOTE: The thin cover is intended to protect against the weather. The cover is not intended to
be used as a cooking hood.
• Make sure that all the control knobs are in the closed (O) position.
• Make sure that the cooking surfaces are clean.
• Open the main gas valve.
Ignition instructions
• Do not light the burners with the cooking surfaces covered.
• To light a burner, press the knob and turn it to the “MAX” (fast pre-heating) position.
• Hold it for 5 seconds (count to 10), release it and check the flame from the slots in the front.
• If the burner is not lit, turn the knob to the closed (O) position. Allow the gas to disperse, and
then repeat the ignition procedure.
OFF
MAX
MIN
Loading ...
Loading ...
Loading ...