Loading ...
Loading ...
Loading ...
Wall Mounted Electric Fireplace
www.touchstonehomeproducts.com
800.215.1990
Revision: 20201009
20
Methods of Operation
This electric fireplace can be operated by the CONTROL PANEL, located in the upper right vent in the front glass
panel, or by the REMOTE CONTROL. The operation and functions of both methods are the same
Control Panel and Remote Control Functions
BUTTON
FUNCTION
ACTION & INDICATION
POWER
ON: Enables control panel functions and remote control.
Turns on the flame effect.
OFF: Disables control panel functions and remove control.
Turns off the flame effect.
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off. Unit
goes to standby. All functions turn off.
TIMER
TIMER button: Control time settings to turn off fireplace
at selected time.
Settings range from 0.5 hours to 7.5 hours.
1. Press once. Indicator light turns on.
Timer is set to 0.5 hours.
2. Press again until desired setting is
reached. Indicator lights show setting.
FLAME +
FLAME +: Makes flame effect brighter.
NOTE: Flame effect stays on until power button is turned
off. Flame effect must be on for heater to turn on.
1. Press once: Flame effect gets brighter.
2. Press again until desired setting is
reached. Flame effect continues to get
brighter each time button is pressed.
FLAME -
FLAME -: Makes flame effect dimmer.
NOTE: Flame effect stays on until power button is turned
off. Flame effect must be on for heater to turn on.
1. Press once: Flame effect gets dimmer.
2. Press again until desired setting is
reached. Flame effect continues to get
dimmer each time button is pressed.
HEATER
HEATER button: Turns heater on and off.
NOTE: The heater only works when the flame effect is on.
NOTE: To prevent overheating, the heater fan will blow
cool air for 8-10 seconds before the heater turns on, and
after the heater turns off.
1. Press once. Indicator lights up. Fan blows
cool air for 10 seconds and 750W heater
turns on and blows warm air.
2. Press again: Indicator lights up. 1500W
heater turns on and blows hot air.
3. Press again. Heater turns off.
Remote Control Operation
• This remote control uses CR2025 battery.
• Instructions for battery installation are located in the remote control battery compartment.
• To improve operation of the remote control, aim the remote control at the front of the fireplace. DO NOT
PRESS the buttons too quickly. Give the unit time to respond to each command.
• NOTICE: NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion. Dispose of batteries at your local hazardous material processing center.
Loading ...
Loading ...
Loading ...