Loading ...
Loading ...
Loading ...
Wall Mounted Electric Fireplace
www.touchstonehomeproducts.com
800.215.1990
Revision: 20201009
13
Wall Mounted Installation – cont.
5. Using the wall mount bracket as a template, mark the holes on the wall at least 8” apart, with 3 of the holes
preferably on 3 studs.
When hanging the wall bracket, it is recommended to fasten the mounting bracket to 3 studs. If fastening to 3
studs, no dry anchors would need to be used. If fastening to only 2 studs, then 3 dry wall anchors would need to be
used to fasten the mounting bracket to the wall.
Note: The minimum height from the bottom of the fireplace, once hung on the wall, to the surface below must be at
least 6”. To meet this criteria, the wall mount bracket should be hung no lower than 24” from the ground to the
top of the mounting bracket when hung on the wall.
6. Once the holes are marked, use a ¼” drill bit to drill a pilot hole. If the screws will go into 3 studs, then no
drywall anchors are needed. If screws only go into 2 studs, you will need to use 3 drywall anchors. Tap the
drywall anchors into the wall until they are flush with the drywall surface.
Loading ...
Loading ...
Loading ...