Loading ...
Loading ...
Loading ...
EMPTYING THE BIN
Hold the container over
the Bin and press the
easy open button at the
rear of the container.
The bin door will open
and you can empty into a
bin with no dust contact.
Once emptied, gently tap
or shake the container to
release any excess dust
from the filters.
Do not overfill the bin
above the max level line.
2
43
To remove the bin from
the cleaner press the
bin release button.
1
CLEANING THE PRE MOTOR FILTERS
Rotate the upper part of the dust bin to open.
1
Remove the lter assembly from the bin top by
rotating the lter. It is advisable to wash the lters
after every 5 bin empties.
2
Remove the mesh frame from the
HEPA lter, then gently tap both lters
to release any excess dust.
3
Wash both lter and protective mesh under warm
water until the water runs clean. Remove excess
water by shaking and leave to dry for 24 hours.
Reassemble and ret lters to cleaner, only when
they are completely dry.
4
CLEANING THE EXHAUST FILTER
The exhaust filter should be washed every month.
Press down on the latch to remove the exhaust grille.
Remove filter and wash with warm water.
Remove excess water by shaking and leave to dry for
24 hours. Refit filters only when completely dry.
!
IMPORTANT! Ensure the mesh frame is
reassembled to the HEPA lter before use
- 6 -
1
2
GB
STORING THE CLEANER
Turn the cleaner off and remove the plug. Wind the
power cord around the cord storage hooks.
Loading ...
Loading ...
Loading ...