Whirlpool PRF013272

User Manual - Page 10

For PRF013272.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after
the cooking is complete to clear all smoke and odors from the
kitchen.
The hood controls are located on the front panel on the right
side of the range hood.
Range Hood Controls
Operating the light
The On/Off light button controls both lights. Press once
forONand again for OFF.
Operating the blower
The Blower Speed buttons turn the blower On and control the
blower speed and sound level for quiet operation. The speed
can be changed anytime during fan operation by pressing the
desired blower speed button.
Press the Blower Off button a second time to turn the blower
OFF.
RANGE HOOD CARE
Cleaning
IMPORTANT: Clean the hood and grease lters frequently
according to the following instructions. Replace grease lters
before operating hood.
Exterior Surfaces:
IMPORTANT: Do not use soap-lled scouring pads, abrasive
cleaners, Cooktop Polishing Creme, steel wool, gritty washcloths
or paper towels.
To avoid damage to the stainless steel, do not use cleaners that
contain chlorine.
Cleaning Method:
Rub in direction of grain to avoid scratching or damaging the
surface.
Stainless Steel Cleaner and Polish Part Number 31462A (not
included):
See “Assistance or Service” section to order.
Liquid detergent or all-purpose cleaner: Rinse with clean
water and dry with soft, lint-free cloth.
Glass cleaner to remove ngerprints.
Metal Grease Filter
1. Remove each lter by pulling the spring release handle
andthen pulling down the lter.
2. Wash metal lters as needed in dishwasher or hot
detergentsolution.
3. Reinstall the lter by making sure the spring release handles
are toward the front. Insert aluminum lter into upper track.
4. Push in spring release handle.
5. Push up on metal lter and release handle to latch into place.
6. Repeat steps 1-5 for the other lter.
A
B
C
D
A. LED lamps
B. Blower and light controls
C. Grease filter handle
D. Grease filter
A
B
C
D
A. On/Off light button
B. Blower off and speed minimum button
C. Blower speed medium button
D. Blower speed maximum button
A
A. Spring release handle
Loading ...
Loading ...
Loading ...