Loading ...
Loading ...
Loading ...
29English
8. Cleaning and Care
Unplug the power cord from the mains outlet. Clean the motor unit using a
slightly dampened so cloth. Cauon! Do not use liquids to clean the motor
unit and the power connecons. Do not use any aggressive, strong or abrasive
cleaning agents.
You can clean the blender jar, the lid and the blade unit in soapy water. The
blender jar and lid can also be cleaned in the dishwasher at low temperatures.
To clean the appliance quickly and immediately aer use, ll the blender jar with
warm water up to about 60%, add some detergent and let the appliance run
briey. Then remove the blender jar and shake it slightly. Make sure that you do
not shake too much, otherwise the liquid can come out of the bender jar. Finally,
rinse the blender jar and the blade unit with clean water unl all the residues and
detergent are removed.
Allow all parts of the appliance to dry completely!
9. Troubleshoong
Error Cause Possible reccaon
The appliance
stops during
the operaon
• 1. Voltage is too low
• 2. Thermal fuse has
tripped
• Check the power supply
• Allow the appliance to cool for
20 to 30 minutes and try again
The blade unit
is stuck
• Blade unit is stuck be-
cause of the contents
• Switch o the appliance and
disconnect the mains plug.
Wait ll the appliance stops
completely and then remove
the content, which is blocking
the blade unit.
Unusual
sounds
• The blade unit was not
mounted properly.
• The appliance was not
placed on a at surface.
• The voltage is too high.
• Excessive content in the
appliance.
• Mount the blade unit properly.
• Place the appliance on a at
surface.
• Check the power supply
• Switch o the power, remove
the addional content.
Loading ...
Loading ...
Loading ...