Loading ...
Loading ...
Loading ...
5
To make a cup of good hot Espresso coffee, we recommend you preheat the
appliance before making coffee, including the funnel, steel mesh and cup, so
that the coffee flavour can not be influenced by the cold parts.
1. Remove the detachable tank and open the tank cover to fill it with desired
water, the water level should not exceed the “MAX” mark in the tank. Then
place the tank into the appliance properly.
2. Set steel mesh into the metal funnel, make sure the tube on the funnel aligns
with the groove in the appliance, then insert the funnel into the appliance from
the “ ” position, and you can fix them into coffee maker firmly through turn
it anticlockwise until it is at the “ ” position.
3. Place an espresso cup (your cup) on a removable drip plate.
4. Then connect the appliance to power supply source. Make sure the coffee/
steam knob is on the “ ” position.
5. Press the ON/OFF switch, the red indicator will be illuminated.
6. When the white indicator is illuminated, you should turn the coffee/steam knob
to the “ ” position, there will be hot water flowing out. After about 30s,
close the coffee/steam knob by turning the coffee/steam knob again to the
“ ” position. The pre-heating is finished.
1.Remove the funnel by turning it in clockwise, .Add ground coffee to steel mesh
with a coffee spoon, a spoon ground coffee power can make about a cup of
top-grade coffee, then press the ground coffee powder tightly with the coffee
spoon.
2.Set steel mesh into the metal funnel, make sure the tube on the funnel aligns
with a groove in the appliance, then insert the funnel into the appliance as
indicating of “ ” mark, and you can fix them into coffee maker firmly
through turning it anticlockwise until it is at the “ ” position.
3.Pour out the hot water in the cup. Then place the hot cup (yourself cup) on
drip plate.
PRE-HEATING
MAKE ESPRESSO COFFEE
Loading ...
Loading ...
Loading ...