Loading ...
Loading ...
Loading ...
12
STARTING TO USE
Before you starting to use the freezer, please check that:
1. The interior is dry and air can circulate freely at the rear.
2. Clean the interior as recommended under "TAKE CARE" section.
3. Insert the plug into the wall socket, all LED lights, digital display light returned to normal
after 2s.; enter to modify status without any operation after 5s, automatically locked.
4. Set temperature range -24°C ~ -16°C.
5. You will hear a noise as the compressor starts up. The liquid and gases sealed within the
refrigeration system may also give rise to noise, wheter the compressor is running or
not which is quite normal.
6. If you going to store already frozen food open the freezer lid and check that the freezer
has reached correct temperature. Then you can put in your already frozen food (see
“Storing Frozen Food”).
7. Do not load the appliance immediately after is switched on. Wait until the correct
storage temperature has been reached. We recommend that you check the
temperature with an accurate thermometer (see “Freezer Operation”).
FREEZER OPERATION
Unlock Settings
Hold the “+” key and “-” key, both at the same time for more than 1s to unlock function,
temperature setting, quick-frozen setting function.
Every press “Up” key, 1°C temperature increase; every press “Down”, 1°C temperature
decrease; when the stop button operation after the 5s system automatically according to the
set temperature, automatic confirmation and exit, stop flashing.
Temperature setting and quick-frozen set the boot parameters of 0,014 downtime parameters.
Quick-Frozen Function
Press the “Super FRZ.” Key 24h before the load, the temperature is set to automatically -30°C,
digital flash slow -30°C, the light is lit at the same time, stop flashing into frozen function after
Loading ...
Loading ...
Loading ...