Loading ...
Loading ...
Loading ...
7
- The appliance must be placed on a horizontal surface. Please refer to feet
kit assembly instruction on page 2 of this booklet or to instructions with
feet (ref. 0517300, 0517400).
Wall mounting version
- Release the appliance’s latching bar.
We recommend you place the appliance flat on the ground. Use a
screwdriver to raise the tongue of the fitting, carefully so as not to
distort it. While keeping the tongue raised, push the latching bar
downwards to release the latches at the top. Pivot the latching bar
around the lower latches. Remove the latching bar.
- Fix the latching bar. Place the latching bar on the floor against the
wall. Locate the drilling points A. These show you where the lower
fastenings are. Lift the latching lug, aligning it with the drilling point A
to locate the drilling points B. These show you where the upper
fastenings are. Drill the four holes, and insert the plugs. If extra
support is needed, use special plugs (e.g.: in plasterboard). Position
the latching bar and screw in place.
Loading ...
Loading ...
Loading ...