Loading ...
Loading ...
Loading ...
22 23
ninjakitchen.eu
USING YOUR
SINGLE-SERVE FRESHVAC™ CUP
IMPORTANT: Review all warnings
on pages 2-5 before proceeding.
1 Place the unplugged motor base
on a clean, dry, and level surface
such as a worktop or table. Press
downward on the motor base to
adhere the suction cups to the
work surface. Plug the motor
base into a socket.
2
Turn the Single-Serve Cup upside
down and install on the motor base.
Align the tabs on the cup with the
slots on the base, then twist until it
clicks into place. Press the Power
symbol to turn unit on. The available
program buttons will illuminate and
the unit will be ready for use.
NOTE: Pre-set programs have pauses
and changes in speed throughout
the cycle.
NOTE: The unit can detect which
container is on the motor base. Only
the functions available for a particular
container will illuminate on the
touchscreen.
3 If using a pre-set program, first
select the program that best suits
your recipe. The pre-set feature will
automatically stop the unit at the end
of the program. To pause the unit at
any time, press the currently active
program a second time. Reference
page 10 for program descriptions.
6
Turn cup over so Pro Extractor Blade®
Assembly is on top. Rotate blade
assembly anti-clockwise to remove.
To take your blended contents on the
go, place travel lid on cup and rotate
clockwise to seal.
7
Unplug the unit when finished. To
release the motor base, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you. Refer to page 34
for storing instructions.
TIPS:
• To learn more about the programs
that work with your Single-Serve
Cup, refer to page 10.
SINGLE-SERVE FRESHVAC™ CUP
WITH FLIP & SEAL LID�
4
When blending is complete, rotate
cup anti-clockwise to remove from
motor base and place cup on a level
surface. Pressure must be released
before opening the cup. (The
vacuum-sealed cup may be stored
in the refrigerator for later use. See
Storing Blended Ingredients in Your
Vacuum-Sealed Cup section.)
5
To release the vacuum seal, first
open the Flip & Seal Lid. Press the
tab on the cap and lift to open.
Open the release seal by pulling it
by the tab. Air will enter the cup,
making it safe to open.
NOTE: DO NOT pull out the FreshVac Tab.
Loading ...
Loading ...
Loading ...