Loading ...
Loading ...
Loading ...
Anti-tip device
101
Do not push the range into
position before all supply
connections have been
established.
The toe kick cover is attached to the
base of the range by magnets.
21
a
Toe kick cover
b
Locking clamp
Remove the toe kick cover from
the appliance.
Pull out the locking clamp .
The locking clamp extends through
the toe kick cover of the range
housing. Its length is approximately
equal to the depth of the range.
A slot is located in the non-visible rear
section of the locking latch. This slot
engages with the bolt of the anti-tip
device when you slide the locking
latch into the range.
Complete all necessary connections
for the range. Read the information in
the "Electrical connection", "Gas
connection" and "Plumbing" sections.
The range can be damaged if it is
lifted using the cover, the trim or the
door handle.
Open the oven door and hold the
appliance by the front of the oven
interior.
Lift the range and move it with the
help of the rear wheels.
Slide the range into position, guiding
the middle of the appliance onto the
anti-tip device. Slide the appliance all
the way back to the wall.
Loading ...
Loading ...
Loading ...