Loading ...
Loading ...
Loading ...
User instructions
21
4. Operating instructions
Once the dishwasher has been correctly installed, prepare it for use as
follows:
Adjust the water softening system (in some models only)
Add salt (in some models only)
Add rinse aid and detergent
4.1 Using the water softening system
(in some models only)
The quantity of lime in the water (which
indicates its hardness) causes whitish
marks on dry dishes, which also tend to
lose their shine over time. The dishwasher
is equipped with an automatic water
softener which removes the substances
that cause hardness from the water with
the aid of a special regenerating salt.
When using water of medium hardness, the salt container should be
refilled after approximately 20 wash cycles. The salt container can hold
approximately 1 kg of salt grains. The container is situated at the bottom
of the dishwasher. After removing the lower basket, unscrew the salt
container cap by turning it anticlockwise and pour in the salt using the
funnel supplied with the dishwasher. Before replacing the cap, remove any
salt residues from around the opening.
When using the dishwasher for the first time, in addition to the salt it
is also necessary to add one litre of water to the container.
Each time the salt container is refilled, make sure that the cap is
securely closed. The mixture of water and detergent must never
enter the salt container, as this would compromise the operation of
the regeneration system. In this case warranty cover will be forfeited.
Only use salt specially formulated for domestic dishwashers. If using
salt tablets, do not fill the container completely.
SALT
Loading ...
Loading ...
Loading ...