Loading ...
Loading ...
Loading ...
User instructions
19
CANCELLING THE PROGRAM IN PROGRESS
- Open the door (watch out for water splashes)
- Press the START button and hold it down until P0 appears on
the top display.
- Close the door (00:01 appears on the front display)
- After about 1 minute the program will be cancelled (“End”
appears on the front display).
CHANGING THE PROGRAM
To change the program in progress, simply open the door (watch out for
water splashes) and select a new program. When the door is closed the
dishwasher will automatically run the new program.
TO SAVE ENERGY AND PROTECT THE ENVIRONMENT
Always try to use the dishwasher with a full load.
Do not wash the dishes in running water.
Use the wash program that is most appropriate for each type of load.
Do not perform preliminary rinsing.
If available, connect the dishwasher to a hot water supply up to 60°C.
Use the ENERSAVE option
TO REDUCE DETERGENT CONSUMPTION AND PROTECT THE
ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent save on
electricity as well, observe the following recommendations:
Sort your dishes, washing delicate items separately from those
more resistant to strong detergents and high temperatures.
Do not pour detergent directly onto dishes.
If the door has to be opened while washing is in progress, the programme
will be interrupted. The programme light will stop flashing and a beeper
will signal that the cycle has not been completed. The pause symbol will
alternate with the time left to the end of the cycle on the front display.
Press the button and close the door. The programme will continue from
the point where it was interrupted. This operation should only be carried
out if strictly necessary, as it could cause problems in running the
pr
ogramme.
Loading ...
Loading ...
Loading ...