Loading ...
Loading ...
Loading ...
10
7. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Charging a Hot or Cold Battery Pack
The green indicator light on the charger base indicates that the
battery pack temperature is outside the charging range. Once
the pack is within the acceptable range, normal charging will
take place and the red light will be continuous. Hot or cold
battery packs may take longer to charge.
Assembly
m
WARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Do not insert battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
mWARNING! Before performing any maintenance, make
sure the battery is removed from the tool. Failure to heed this
warning could result in serious personal injury.
mWARNING! To prevent personal injury, make sure the
switch is in the OFF position before attaching or removing the
suction hose.
1. Unlock the powerhead by î›…ipping up the latches on both
sides, and then lift up (Fig. 5).
2. Remove all the contents from the tank.
3. Turn the dust tank upside down. Fit a caster into the
mounting as shown. Fix with provided screw. Do not
overtighten (Fig. 6).
4. Repeat to assemble all the 5 casters on the bottom
(Fig. 7).
NOTE: The assembly requires 5 screws. The 3 additional
screws are spares.
Lithium-Ion Charging Status
Battery
Pack
Temperature
Charger
Base
Indicator
Light
Battery
Pack
Indicator
Light
Charging
Status
Too hot
Green
Flashing
together
Not charging
Normal range
Red
Flashing
one by one
Normal
charging
Too cold
Green
Flashing
together
Not charging
Fig. 5
Latch lockLatch lock
Fig. 6
Caster
Screw
Fig. 7
Loading ...
Loading ...
Loading ...