Loading ...
Loading ...
Loading ...
54
TECHNICAL INFORMATION
Specifications
• Unique Fan Sounds: 10 • Speaker Compensation: Multi-band Parametric EQ • Product Dimensions: 4.4" x 4.4" x 2.2"
• Unique White Noises: 10 • Power Requirements: 5 Volts, 500 mA, DC
TROUBLESHOOTING
If your unit exhibits a problem, try the actions below to resolve the problem.
Software Licensing
The software contained in the LectroFan System is licensed to you, not sold to you.
This is only to protect our intellectual property and has no aect on your ability to use
the LectroFan unit wherever you please.
Safety Instructions
Read and adhere to all safety and operating instructions before use. Keep this
booklet for future reference.
1. WARNING: Do Not Operate Heavy Machinery or Motor Vehicles While Using
this Device.
2. The unit should be cleaned regularly with a soft, dry cloth. The grill may be
vacuumed to remove excessive dust or particle build-up. Do not use any liquids
or sprays (including solvents, chemicals or alcohol) or abrasives to clean.
3. The unit should not be used near water, such as a bathtub, swimming pool,
faucet or basin to avoid electrocution.
4. Be careful to avoid dropping objects or spilling liquids onto the unit. If liquid is
spilled on the unit, unplug and turn it upside down immediately. Allow it to dry
thoroughly (one week) before plugging it into a wall outlet again. Following
these instructions does not ensure that the unit will be operational.
5. Do not reach for the unit if it has fallen into water. Unplug it immediately at
the wall outlet, and if at all possible drain water before retrieving the unit.
6. The unit should be situated away from heat sources such as radiators, heat
registers, stoves or other appliances (includin
g amplifiers) that produce heat.
7. Avoid placing the unit in areas that are exposed to direct sunlight or close to
heat-radiating products such as electric heaters. Do not place unit on top of stereo
equipment that radiates heat.
8. Avoid placing in areas that are dusty, humid, moist, lack ventilation, or are subject to
constant vibration.
9. The unit may be subject to interference from external sources such as transformers,
electric motors or other electronic devices. To avoid distortion from such sources,
place the unit as far away from them as possible.
10. Do not apply excessive force when using any switches or controls.
11. The unit should only be used with the power adapter provided or AA batteries.
12. Power cords should be routed to avoid being walked on or pinched by items placed
on or against them.
13. Unplug the power adapter from the outlet when the unit is unused for long periods
of time or when moving the unit.
14. Do not attempt to service the unit yourself beyond what is described in the operating
instructions.
One Year Limited Warranty
Adaptive Sound Technologies, Inc., hereinafter referred to as ASTI, warrants this product
against defects in materials and/or workmanship under normal use for a period of ONE
(1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a
defect arises and a valid claim is received within the Warranty Period, at its option, ASTI
will either 1) repair the defect at no charge, using new or refurbished replacement parts, or
2) replace the product with a current product that is close in functionality to the original
product. A replacement product or part, including a user-installable part installed in
accordance with instructions provided by ASTI, is covered by the remaining warranty
of the original purchase.
When a product or part is exchanged, the replacement item becomes your property and
the replaced item becomes ASTI’s property.
Obtaining Service: To obtain warranty service please call, or email, your reseller. Please
be prepared to describe the product that needs service and the nature of the problem.
All repairs and replacements must be authorized in advance by your reseller. A purchase
receipt must accompany all returns. Service options, parts availability and response times
will vary.
Limits and Exclusions: This Limited Warranty applies only to the ASTI LectroFan unit,
ASTI power cable, and/or the ASTI power adapter. It does NOT apply to any bundled
non-ASTI components or products.
This warranty does not apply to: a) damage caused by failure to follow instructions relating
to the product’s use or to the installation of components; b) damage caused by accident,
abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by
service performed by anyone who is not a representative of ASTI; d) accessories used in
conjunction with a covered product; e) a product or part that has been modified to alter
functionality or capability; f) items intended to be periodically replaced by the purchaser
during the normal life of the product including, without limitation, batteries or light bulbs;
or g) any and all pre-existing conditions that occur prior to the eective date of this
Limited Warranty relating to any product sold “as is” including, without limitation, floor
demonstration models and refurbished items.
SAFETY, WARRANTY, AND CERTIFICATIONS
Symptom Possible Cause Solution
No operation • Device is Check that the USB cable is
when power unplugged firmly plugged into the power
switch is pressed adapter and the power adapter
is plugged into an AC outlet.
• Faulty wall outlet Try another AC wall outlet.
LectroFan is on • Volume is set Press or hold volume up button
but no sound too low down to increase the volume level.
The unit goes • This mode is set You can disable this function by
on immediately by default to 1) Turn unit o.
when I plug it in allow you to 2) Press and hold down volume
use an AC down button.
power timer 3) press and release power button.
4) release volume down button.
I want a noise • You are in the Press the “Noise” button to enter
sound but I hear “Fan Mode” noise mode. press repeatedly
a fan sound and you will step through all the
white noises. Stop when you find
your favorite.
Symptom Possible Cause Solution
I want a fan • You are in the Press the “Fan” button to enter
sound but “Noise Mode” fan mode. press repeatedly and
I hear a you will step through all the fan
white noise sounds. Stop when you find your
favorite.
Other • Perform a 1) Plug power plug into an
unexpected factory reset AC outlet.
behavior (see page 3) 2) Press power button to turn o.
3) Press and hold the power
button.
4) Release power button when
unit makes a “whoop” sound.
Settings • Unplugging LectroFan only remembers your
not saved the LectroFan settings when you turn it o
instead of using the power button.
using the
power button
Loading ...
Loading ...
Loading ...