Loading ...
Loading ...
32
PICK YOUR SOUND
• Press the fan sounds button (left side) to play fan
sounds. Press it again to play the next fan sound.
• Press the white noises button (right side) to play
white noise sounds. Press it again to play the next
white noise.
To signal a return to the fi rst fan sound or white noise
you will hear a short rising tone (“whoop” sound).
LectroFan will remember the last noise and fan setting
that you made when changing modes. This way you can
easily switch back and forth between your favorite fan
sound and your favorite white noise.
Note: All settings are saved when the LectroFan is
turned o using the power button, but not saved
if the unit is simply unplugged.
TIMER
Turning on your LectroFan results in continuous play, until the timer
is turned on. The timer sets the unit to play for a minimum of one hour
and then gradually shut o . The LectroFan will create a short “dip”
in the sound when you press the timer button so you’ll know for sure
you have pressed it.
Power-on Default
If you don’t want the LectroFan to turn on immediately when
you fi rst plug it in, you can disable that function with this procedure:
1. Turn o the LectroFan with the power button
2. Press and hold down the volume down button while pressing and releasing the power button.
3 Turn o the LectroFan. To enable this function again, restore the factory settings as covered below.
Restoring Factory Settings
Turn o the LectroFan. Press and hold the power button down until it makes a short rising tone (“whoop” sound).
Your LectroFan has now been reset to its original factory defaults. After performing the reset, the default fan sound
is set to “Large Fan” and the default noise is set to “Brown”. The default is set to “Fan Mode,” the volume is set
to a comfortable level, and the LectroFan is set to turn on immediately when it’s fi rst plugged in.
Using an External Timer or Power Strip
If you use a switched power strip or your own external timer to supply power to your LectroFan, be sure to switch
the LectroFan o and then back on using the power button when you change your settings—only then will the
LectroFan remember them.
Timer
Button
•
POWER
on/o
60 min
Note: The timer can be set to
60 minutes by pressing the
timer button once. Press the
timer button additional times
to add 60 minutes to the time
you would like LectroFan to play.
NOISES
Lowest Pitch White Noise
Brown
Chestnut
Cinnamon
Tan
Amber
Cream
Pink
Coral
Champagne
Pure White
Highest Pitch White Noise
Step through
the 10 Fan Sounds
Step through
the White Noises
FAN
SOUNDS
WHITE
NOISES
FAN SOUNDS
1 Large Fan
2 Industrial Fan
3 Mellow Fan—LO
4 Mellow Fan—HI
5 Exhaust Fan
6 Attic Fan
7 Circular Fan
8 Vent Fan
9 Box Fan
10 Oscillating Fan
Loading ...
Loading ...
Loading ...